Linear Technology DC1009A-A - LTC2492 24-bit, 2-ch ADC, req. DC590 DC1009A-A DC1009A-A 数据表
产品代码
DC1009A-A
1
dc1009af
DEMO MANUAL DC1009A
DESCRIPTION
LTC2492/LTC2488/LTC2486
2-/4-Channel 24-/16-Bit ΔΣ ADC
with Easy Drive Input Current Cancellation
Demonstration circuit 1009A-A features the LTC
®
2492
2-/4-channel, 24-bit ΔΣADC with Easy Drive™ inputs.
Key DC specifications include 2ppm INL, 1ppm offset,
25ppm full-scale error and 10nV/°C offset drift. In the
6.8Hz/600nV
Key DC specifications include 2ppm INL, 1ppm offset,
25ppm full-scale error and 10nV/°C offset drift. In the
6.8Hz/600nV
RMS
mode, input normal mode rejection of
50Hz and 60Hz noise is better than 87dB. The LTC2492 also
includes an internal temperature sensor that is accurate
to 2°C over the operating temperature range.
includes an internal temperature sensor that is accurate
to 2°C over the operating temperature range.
Demonstration circuit 1009A-B features the LTC2488
2-/4-channel, 16-Bit ADC that is pinout and software
compatible with the LTC2492.
2-/4-channel, 16-Bit ADC that is pinout and software
compatible with the LTC2492.
Demonstration circuit 1009A-C features the LTC2486
2-/4-channel 16-Bit ADC that also includes a PGA with
a gain range from 1 to 256 and the same temperature
sensor as the LTC2492.
2-/4-channel 16-Bit ADC that also includes a PGA with
a gain range from 1 to 256 and the same temperature
sensor as the LTC2492.
L, LT, LTC, LTM, μModule, Linear Technology and the Linear logo are registered trademarks
and Easy Drive and QuikEval are trademarks of Linear Technology Corporation. All other
trademarks are the property of their respective owners.
and Easy Drive and QuikEval are trademarks of Linear Technology Corporation. All other
trademarks are the property of their respective owners.
BOARD PHOTO
DC1009 is a member of Linear Technology‘s QuikEval™
family of demonstration boards. It is designed to allow easy
evaluation of the LTC2492, LTC2488 or LTC2486. DC1009
may be connected directly to the target application’s ana-
log signals while using the DC590 USB serial controller
board and supplied software to measure performance.
After evaluating with LTC’s software, the digital signals can
be connected to the application’s processor/controller for
development of the serial interface.
family of demonstration boards. It is designed to allow easy
evaluation of the LTC2492, LTC2488 or LTC2486. DC1009
may be connected directly to the target application’s ana-
log signals while using the DC590 USB serial controller
board and supplied software to measure performance.
After evaluating with LTC’s software, the digital signals can
be connected to the application’s processor/controller for
development of the serial interface.
Design files for this circuit board are available at
http://www.linear.com/demo
http://www.linear.com/demo
RIBBON CABLE
TO DC590
TO DC590
COM BIAS
OR TIE TO GROUND
OR TIE TO GROUND
SINGLE-ENDED
SIGNALS
DIFFERENTIAL SIGNALS
(OBSERVE COMMON
MODE LIMITATIONS)
REFERENCE MONITOR
(OR EXTERNAL SOURCE:
SEE HARDWARE SET-UP)
+
–