Linear Technology DC1079A-B - LTC4310-2 (400kHz) I²C Isolator DC1079A-B DC1079A-B 数据表

产品代码
DC1079A-B
下载
页码 20
LTC4310-1/LTC4310-2
1
431012fa
Typical applicaTion
DescripTion
Hot-Swappable  
I
2
C Isolators
The LTC
®
4310 provides bidirectional I
2
C communications 
between two I
2
C buses whose grounds are isolated from 
one another. Each LTC4310 encodes I
2
C bus logic states 
into signals that are transmitted across an isolation barrier 
to another LTC4310. The receiving LTC4310 decodes the 
transmission and drives its l
2
C bus to the appropriate logic 
state. The isolation barrier can be bridged by an inexpensive 
Ethernet, or other transformer, to achieve communications 
across voltage differences reaching thousands of volts, or 
it can be bridged by capacitors for lower voltage isolation. 
The LTC4310-1 is intended for use in 100kHz I
2
C systems. 
The LTC4310-2 is intended for 400kHz I
2
C systems. 
Rise time accelerators provide strong pull-up currents on 
SCL and SDA rising edges to meet rise time specifications 
for heavily loaded systems. Data and clock Hot Swap™ 
circuitry prevent data corruption when a card is inserted 
into or removed from a live bus. When a bus is stuck low 
for 37ms, the LTC4310 turns off its pull-down devices 
and generates up to sixteen clocks and a STOP bit in an 
attempt to free the bus. Driving EN low sets the LTC4310 
in a very low current shutdown mode to conserve power.
L
, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear 
Technology Corporation. Hot Swap is a trademark of Linear Technology Corporation. All other 
trademarks are the property of their respective owners.
1500V Isolated I
2
C System
FeaTures
applicaTions
n
  Bidirectional I
2
C Communication Between Two  
Isolated Buses
n
  Full Isolation with Inexpensive Ethernet 
Transformers or Capacitors
n
  Low Voltage Level Shifting
n
  I
2
C Maximum Operating Frequency:
    100kHz for LTC4310-1
    400kHz for LTC4310-2
n
  I
2
C Specification Compliant V
OL
, V
IL
n
  ±5kV Human Body Model ESD Protection
n
  Rise Time Accelerators
n
  SDA, SCL Hot-Swapping
n
  Very Low Shutdown Current
n
  Stuck Bus Disconnect and Recovery
n
  Thermal Shutdown
n
  10-Lead MSOP and 3mm × 3mm DFN Packages
n
  Isolated I
2
C, SMBus and PMBus Interfaces
n
  Isolated Power Supplies
n
  Positive-to-Negative Rail Communications
n
 Power-over-Ethernet
LTC4310 Operating Through 
20kV/µs Common Mode Transient
RXP
10/100Base-TX
ETHERNET TRANSFORMER
EPF8119S
RXN
TXP
SDA
SCL
EN
TXN GND
READY
0.01µF
0.01µF
ISOLATED
5V
3.3V
3.3k
3.3k
3.3k
3.3k
LTC4310-1
VCC
SDA2
SCL2
SDA1
SCL1
0.01µF
0.01µF
431012 TA01a
TXP
TXN
RXP
RXN
SDA
SCL
EN
READY
GND
LTC4310-1
VCC
2µs/DIV
20kV/µs
0V
0V
500V/
DIV
2V/DIV
431012 TA01b
SDA
SCL