Atmel ATmega328P Xplained Mini MEGA328P-XMINI MEGA328P-XMINI 数据表
产品代码
MEGA328P-XMINI
17
ATmega48A/PA/88A/PA/168A/PA/328/P [DATASHEET]
Atmel-8271H-AVR- ATmega-Datasheet_08/2014
8.
AVR Memories
8.1
Overview
This section describes the different memories in the ATmega48A/PA/88A/PA/168A/PA/328/P. The AVR
architecture has two main memory spaces, the Data Memory and the Program Memory space. In addition, the
ATmega48A/PA/88A/PA/168A/PA/328/P features an EEPROM Memory for data storage. All three memory
spaces are linear and regular.
architecture has two main memory spaces, the Data Memory and the Program Memory space. In addition, the
ATmega48A/PA/88A/PA/168A/PA/328/P features an EEPROM Memory for data storage. All three memory
spaces are linear and regular.
8.2
In-System Reprogrammable Flash Program Memory
The ATmega48A/PA/88A/PA/168A/PA/328/P contains 4/8/16/32Kbytes On-chip In-System Reprogrammable
Flash memory for program storage. Since all AVR instructions are 16 or 32 bits wide, the Flash is organized as
2/4/8/16K x 16. For software security, the Flash Program memory space is divided into two sections, Boot
Loader Section and Application Program Section in ATmega88PA and ATmega168PA. See SPMEN description
in section
Flash memory for program storage. Since all AVR instructions are 16 or 32 bits wide, the Flash is organized as
2/4/8/16K x 16. For software security, the Flash Program memory space is divided into two sections, Boot
Loader Section and Application Program Section in ATmega88PA and ATmega168PA. See SPMEN description
in section
The Flash memory has an endurance of at least 10,000 write/erase cycles. The
ATmega48A/PA/88A/PA/168A/PA/328/P Program Counter (PC) is 11/12/13/14 bits wide, thus addressing the
2/4/8/16K program memory locations. The operation of Boot Program section and associated Boot Lock bits for
software protection are described in detail in
ATmega48A/PA/88A/PA/168A/PA/328/P Program Counter (PC) is 11/12/13/14 bits wide, thus addressing the
2/4/8/16K program memory locations. The operation of Boot Program section and associated Boot Lock bits for
software protection are described in detail in
and
Constant tables can be allocated within the entire program memory address space (see the LPM – Load
Program Memory instruction description).
Program Memory instruction description).
Timing diagrams for instruction fetch and execution are presented in