Olimex Open Source Hardware Embedded ARM Linux Single board computer with i.MX233 ARM926J @454Mhz IMX233-OLINUXINO-MAXI IMX233-OLINUXINO-MAXI 数据表
产品代码
IMX233-OLINUXINO-MAXI
OLIMEX© 2012
OLinuXino-MAXI user's manual
6.9 Battery connector
When using the battery connector keep in mind that it is an energy solution that wouldn't be able to
power the board and all the peripherals. The voltage of a 3.7V LIPO battery would be enough to
power the processor and the memory but won't be enough to power the LAN and the USB hosts.
power the board and all the peripherals. The voltage of a 3.7V LIPO battery would be enough to
power the processor and the memory but won't be enough to power the LAN and the USB hosts.
Pin #
Signal Name
1
VBAT
2
GND
The pins are also written on the top of the board in the base of the connector.
6.10 Composite video connector
The composite video is the connector you should use if you wish OLinuXino-
MAXI video output on a monitor.
MAXI video output on a monitor.
The whole signal is controlled by pin #104 from the i.MX233 processor.
The + signal is lead to the middle of the connector. The outside part is the GND.
Page 44 of 60