Olimex 4.3'' LCD screen with backlight and resistive touch screen panel, compatible with A13-OLinuXino and iMX233-OLinuXino Oli A13-LCD43TS 数据表
产品代码
A13-LCD43TS
OLIMEX© 2012
A13-OLinuXino user's manual
6.9 Battery connector
When using the battery connector keep in mind that it is an energy solution that wouldn't be able to
power the board and all the peripherals. The voltage of a 3.7V LIPO battery would be enough to
power the processor and the memory but won't be enough to power external touchscreen LCD.
power the board and all the peripherals. The voltage of a 3.7V LIPO battery would be enough to
power the processor and the memory but won't be enough to power external touchscreen LCD.
Pin #
Signal Name
1
VBAT
2
GND
The pins are also print at the bottom of the board under the connector.
6.7 VGA video connector
The female DB15 connector is used for video output on a monitor.
At the moment the maximum achieved resolution is 800x600 due
to limited maximum frequency and the lack of integrated video
controller in the chip.
At the moment the maximum achieved resolution is 800x600 due
to limited maximum frequency and the lack of integrated video
controller in the chip.
VGA connector
GPIO Pin#
Signal Name
GPIO Pin#
Signal Name
1
VGA_R
2
VGA_G
3
VGA_B
4
Not Connected
5
GND
6
GND
7
GND
8
GND
9
GND
10
GND
11
Not Connected
12
Not Connected
13
VGA_HSYNC
14
VGA_VSYNC
15
Not Connected
16
Not Connected
Page 27 of 37