Towitek TWT2020 Universal Access Controller UAC400 TWT2020 数据表
产品代码
TWT2020
Technical Data
TowiTek Universal Access Control Module UAC400
dimensions:
68x55x25 mm
power requirements:
12V=(DC) @ 60mA max.
maximum load for Relay:
50 VDC / 3A
memory storage capacity
up to 400 ID's
allowed ambient temperature:
0°C .... 40°C (no condensing moisture)
compatible input devices:
units with 42-Bit Wiegand Interface
z.B. RFID-Antenna BN 19 15 27
or RF-Receiver BN 19 15 67
z.B. RFID-Antenna BN 19 15 27
or RF-Receiver BN 19 15 67
Disposal after end of using life for this product
Electronic devices of all kinds must not be disposed thru regular
household waste disposal but should be turned in to a collection
household waste disposal but should be turned in to a collection
point for proper recycling. Please check with your local
requirements.
Limited Warranty
This product was designed and manufactured with great care and comes with a
warranty against material or manufacturing defects at time of purchase. This
warranty is valid for 24 months starting with the day of purchase and can be claimed
with original sales receipt. The warraty of TowiTek is limited to cost free repairing or
replacement of the defective unit. Expenses and risk of transportation; compensation
for installation and de-installation and all other expenses which may be related to the
repair or exchange of this product are not refunded by TowiTek. The liability for
consequential damages resulting from the use of this product – no matter of which
exact kind – is generally ruled out.
warranty against material or manufacturing defects at time of purchase. This
warranty is valid for 24 months starting with the day of purchase and can be claimed
with original sales receipt. The warraty of TowiTek is limited to cost free repairing or
replacement of the defective unit. Expenses and risk of transportation; compensation
for installation and de-installation and all other expenses which may be related to the
repair or exchange of this product are not refunded by TowiTek. The liability for
consequential damages resulting from the use of this product – no matter of which
exact kind – is generally ruled out.
TowiTek
Universal Access Control
Module UAC400
Nr. 19 15 80
User Guide
www.conrad.com
Thank you for purchasing this product of TowiTek!
This user guide contains many important instructions on
safe and proper use of this product. The purpose of this
user guide is to make sure you always will get best
performance and reliable operation of your new product.
PLEASE FULLY READ THIS USER GUIDE!
The handling of products operating with electric current requires you to
follow the rules from VDE such as VDE 0100, VDE0550/0551, VDE 0700,
VDE 0711 and VDE 0860 or other local rules in your country.
follow the rules from VDE such as VDE 0100, VDE0550/0551, VDE 0700,
VDE 0711 and VDE 0860 or other local rules in your country.
•
TowiTek modules are not designed and authorized for use in life support
or life saving applications! Do not use the product for applications in
which a temporary or permanent failure or malfunction could cause
damage to persons or propery.
or life saving applications! Do not use the product for applications in
which a temporary or permanent failure or malfunction could cause
damage to persons or propery.
•
If the module is used to switch currents greater 24V it is necessary to
have the installation done with no voltage applied and performed by a
trained professional authorized for such work. The module may only be
used in such application if it was installed in a safe to touch enclosure.
have the installation done with no voltage applied and performed by a
trained professional authorized for such work. The module may only be
used in such application if it was installed in a safe to touch enclosure.
•
The module must only be used in dry and clean environment. The use
near water, heavy dirt and/or high humidity is dangerous and not
permitted.
near water, heavy dirt and/or high humidity is dangerous and not
permitted.
•
The product must not be used in conjunction with any type of flammable
liquid or gas or other environment with risk of spark triggered
explosions.
liquid or gas or other environment with risk of spark triggered
explosions.
•
Never exceed the limits or ratings listed in the 'Technical Data' section at
the end of this user guide.
the end of this user guide.
•
If the module is used in schools or educational facilities or similar
institutions the operation must be supervised by trained and authorized
staff.
institutions the operation must be supervised by trained and authorized
staff.
•
The product itself and all parts thereof (including packing material) are
not suitable toys for childern! (choking hazard, risk of electric shock, ...)
not suitable toys for childern! (choking hazard, risk of electric shock, ...)
Intended use for this product
The TowiTek Universal Access Control Module UAC400 is the core
processing unit for a simple but highly efficient access control system with
up to 400 ID tokens. It is necessary to connect a input device via the
Wiegand interface such for as example a RFID-reader or a RF-receiver
unit.
processing unit for a simple but highly efficient access control system with
up to 400 ID tokens. It is necessary to connect a input device via the
Wiegand interface such for as example a RFID-reader or a RF-receiver
unit.
Special features of the access control module UAC400
•
learns up to 400 ID tokens (e.g. cards, transmitters)
•
display of the the ID numbers
•
lost ID tokens can be deleted from the memory by choosing the related
memory location
memory location
•
high capacity relay switch contact configurable for toggle or timer modes
Operating Instructions
Display of the memory location numbers
The module has a two digit LED display for showing memory location
numbers. The last two digits of the memory number are represented by
the two digits (00 ... 99). The highest digit (0,1,2,3) for showing the full
range of 000..399 are displayed by the two dots on the top edge. The dot
on the left side represents '+200' and the dot on the right side '+100'. Here
are some examples for displayed numbers:
numbers. The last two digits of the memory number are represented by
the two digits (00 ... 99). The highest digit (0,1,2,3) for showing the full
range of 000..399 are displayed by the two dots on the top edge. The dot
on the left side represents '+200' and the dot on the right side '+100'. Here
are some examples for displayed numbers: