Olimex Header board for STM32F103RBT6 CORTEX M3 ARM microcontroller STM32-P103 STM32-P103 用户手册
产品代码
STM32-P103
INTRODUCTION:
STM32-P103 board is development board which allow exploring the complete features of
the new ARM Cortex M3 STM32F103RBT6 microcontrollers produced by ST
Microelectronics Inc.
The board have SD/MMC card connector and allow USB Mass storage device demo to be
evaluated. The RS232 driver and connector allow USB to Virtual COM port demo to be
evaluated. The CAN port and driver allow CAN applications to be developed. The UXT
connector allow access to all other UEXT modules produced by OLIMEX like MOD-MP3,
MOD-NRF24LR, MOD-NOKIA6610 etc to be connected easily. In the prototype area
customer can solder his own custom circuits and to interface them to USB, CAN, RS232 etc.
the new ARM Cortex M3 STM32F103RBT6 microcontrollers produced by ST
Microelectronics Inc.
The board have SD/MMC card connector and allow USB Mass storage device demo to be
evaluated. The RS232 driver and connector allow USB to Virtual COM port demo to be
evaluated. The CAN port and driver allow CAN applications to be developed. The UXT
connector allow access to all other UEXT modules produced by OLIMEX like MOD-MP3,
MOD-NRF24LR, MOD-NOKIA6610 etc to be connected easily. In the prototype area
customer can solder his own custom circuits and to interface them to USB, CAN, RS232 etc.
BOARD FEATURES:
-
CPU: STM32F103RBT6 ARM 32 bit CORTEX M3™
-
JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-
JTAG, ARM-USB-OCD, ARM-USB-TINY
JTAG, ARM-USB-OCD, ARM-USB-TINY
-
USB connector
-
CAN driver and connector
-
RS232 driver and connector
-
UEXT connector which allow different modules to be connected (as MOD-MP3, MOD-
NRF24LR, etc)
NRF24LR, etc)
-
SD-MMC connector
-
backup battery connector
-
user button
-
RESET button
-
status LED
-
power supply LED
-
on board voltage regulator 3.3V with up to 800mA current
-
single power supply: takes power from USB port or extension connector pin
-
8 Mhz crystal oscillator
-
32768 Hz crystal and RTC backup battery connector
-
extension headers for all uC ports
-
RESET button
-
status LED
-
power supply LED
-
on board voltage regulator 3.3V with up to 800mA current
single power supply: takes power from USB port or power supply jack
single power supply: takes power from USB port or power supply jack
-
PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
-
Dimensions: 100 x 90mm (3.94 x 3.5")
ELECTROSTATIC WARNING:
The STM32-P103 board is shipped in protective anti-static packaging. The board must not
be subject to high electrostatic potentials. General practice for working with static sensitive
devices should be applied when working with this board.
be subject to high electrostatic potentials. General practice for working with static sensitive
devices should be applied when working with this board.