Olimex Open Source Hardware Embedded ARM Linux Single board computer with dual core, dual GPU ALLWINNER A20 CORTEX-A7 A2 A20-OLinuXino-MICRO 数据表

产品代码
A20-OLinuXino-MICRO
下载
页码 44
OLIMEX© 2013
A20-OLinuXino-MICRO user's manual
A place for general questions, FAQ or friendly talk: 
. 
You can get the latest updates on the software at: 
You may may join our IRC channel #olimex @ freenode.net (
ORDER CODES:
A20-OLinuXino-MICRO-4GB – the NAND version of A20-OLinuXino-MICRO with additional 
4GB NAND memory (and built-in Android image)
A20-OLinuXino-MICRO – the lite version of A20-OLinuXino-MICRO with no external NAND
USB-SERIAL-CABLE-F - USB serial console cable female 
USB-MINI-CABLE – standard USB type A to USB type mini cable
A20-VGA-CABLE - adapter from 6-pin connector to standard 15-pin VGA one 
SY0612E – reliable power supply adapter 50Hz (for EU) 12V/0.5A for A20-OLinuXino-MICRO
SY0612E-CHINA – cheaper power supply adapter 50Hz (for EU) 12V/0.5A for A20-OLinuXino-
MICRO
A20-Android-SD – a tested class 10 micro SD card with the latest (by the time of leaving the 
Olimex facilities) official Android release
A20-Debian-SD – a tested class 10 micro SD card with the latest (by the time of leaving Olimex 
facilities) official Debian Linux release
A13-LCD43TS – low-cost 4.3'' LCD display with touchscreen component - 480 x 272 
A13-LCD7 – low-cost 7'' LCD display with optional touchscreen component - 800 x 480
A13-LCD10 – low-cost 10'' LCD display with optional touchscreen component – 1024 x 600
How to purchase?
You can purchase directly from our online shop or from any of our distributors. Note that usually it 
is faster and cheaper to purchase Olimex products from our distributors. List of confirmed Olimex 
LTD distributors and resellers: 
Please visit 
 for more info.
8.4 Frequently asked questions
Q: I power my board, it shows a logo and then nothing happens.
A: This might be due to a number of reasons but it is recommended to try the following:
1. Download latest official image from our wiki (either Android or Debian; either for SD card or 
NAND memory), and upload it to the NAND or to an SD card again. There are instructions how to 
do it in the other questions below. Try if the board works now.
2. Check if your power supply provides enough current, try with different/better power supply.
3. Check the USB hub you are using, plug the USB cable directly to the back of your personal 
computer, check the USB cable.
Page 41 of 44