STMicroelectronics Pop-free 120 mW stereo headphone amplifier DEMOTS488S DEMOTS488S 数据表
![STMicroelectronics](https://files.manualsbrain.com/attachments/85e232556493f6593142a5f6ed733c3f99c18e67/common/fit/150/50/bb1a2902b00a9908c4092dd742ba7c1184daa573d65028c54613388aeecc/brand_logo.png)
产品代码
DEMOTS488S
TS488-TS489
Application information
Doc ID 11971 Rev 5
27/32
Connecting the headphones
Generally headphones are connected using jack connectors. To prevent a pop in the
headphones when plugging in the jack, a pulldown resistor should be connected in parallel
with each headphone output. This allows the capacitors C
headphones when plugging in the jack, a pulldown resistor should be connected in parallel
with each headphone output. This allows the capacitors C
out
to be charged even when the
headphones are not plugged in.
Pulldown resistors with a value of 1 k
Ω are high enough to be a negligible load, and low
enough to charge the capacitors C
out
in less than one second.
Note:
The pop&click reduction circuitry works properly only when both channels have the same
value for the external components C
value for the external components C
in
, C
out
, R
load
and R
pulldown
.