Carson BRUSHLESS-SET DRAGSTER PRIME 14T 500906164 用户手册

Blue and red LED illuminated: Training mode (Reverse travel ON)

Blue LED illuminated: Racing mode (Reverse travel OFF) 

When you operate the speed controller for the first time, the undervoltage pro-
tection (Cut-Off) is adjusted on 5.4 V NiMH.This depends on the type of battery 
used. The appropriate undervoltage protection is activated after the battery type 
being used, has been selected: 

Red LED flashes: 

Undervoltage protection on

  

NiCd/NiMH:

 

 

LED flashes when a battery voltage of 4 V is 

 

 

reached or undershot, engine continues to 

  

run. 

 

 

 

Two-cell or three-cell LiPo:

 

 

LED flashes when the battery voltage of 

 

 

3.0 V per cell is reached or undershot. 

 

 

The engine continues to run, but only on 

  

half 

power. 

 

 

 

Discontinue using the vehicle and charge 

  

the 

battery.

Blue LED flashes: The LED flashes if the speed controller is overheating. The power 
to the motor is shut off. Please switch speed controller off and wait until the 
controller has cooled down.

The low voltage protection (cut-off) powers down the motor if the set voltage is 
not maintained.

Undervoltage protection 

NiMH

Maximum reverse travel 

25 %

Initial braking effect 

30 %

Percentage drag brake when 
throttle/brake lever in neutral 

10 %

Dead Band 

Level 3

Switchover 
Braking/reverse travel 

After release of the brake and the 

 

 

throttle/brake lever having been 

 

 

taken out of neutral