Carson BRUSHLESS-SET DRAGSTER PRIME 16T 500906165 用户手册

The speed controller can be operated immediately after it has been synchronized 
with the transmitter. However, specific parameters can be adjusted to suit 
particular conditions.

The controller is programmed using the SET button. When you press the button 
down, different LEDs and combinations of LEDs flash one after the other. Each 
LED combination represents a particular menu which can be selected and set by 
releasing the SET button at the required combination. 

• 

Battery type (NiCd/NiMH, LiPo), Cut-Off

• 

Training journey/racing mode

• 

Initial braking action 0 % - 70 %

• 

Percentage drag brake when the throttle/braking lever is in neutral 
0 % - 45 %

• 

Dead band Level 1 – 5

• 

Driver profile 1 - 5: Select from four pre-programmed settings for 
throttle/brake. 

Profile 5 resets the speed controller to the factory defaults.

You have various tuning options within the individual menu items. These are 
distinguished by the flashing frequency of the LEDs, and are selected by pressing 
the SET button.

These are distinguished by the flashing frequency of individual LEDs, and are 
selected by releasing or pressing the SET button at the corresponding time. The 
flashing frequency of blue LED indicates the current selected menu item (e.g. 
battery type, initial brake, etc.). The flashing frequency of red LED indicates the 
current selected setting (e.g. 10 %, 20 %, 30 %, etc.).

When you select the menu item, the LED flashes/LEDs flash in the 
frequency of the previously selected option.