Tams Elektronik 53-02180-02 H0 2 pcs set ZSB-2 rear train lighting 53-02180-02 数据表
产品代码
53-02180-02
LED Control
English
Page 19
2. Safety instructions
Mechanical hazards
Cut wires can have sharp ends and can cause serious injuries. Watch
out for sharp edges when you pick up the PCB.
Visibly damaged parts can cause unpredictable danger. Do not use
damaged parts: recycle and replace them with new ones.
Cut wires can have sharp ends and can cause serious injuries. Watch
out for sharp edges when you pick up the PCB.
Visibly damaged parts can cause unpredictable danger. Do not use
damaged parts: recycle and replace them with new ones.
Electrical hazards
§
Touching powered, live components,
§
touching conducting components which are live due to malfunction,
§
short circuits,
§
connecting the circuit to another voltage than specified,
§
impermissibly high humidity,
§
condensation build up
can cause serious injury due to electrical shock. Take the following
precautions to prevent this danger:
precautions to prevent this danger:
§
Never perform wiring on a powered device.
§
Mounting the devices should only be done in closed, clean, dry
rooms. Beware of humidity.
rooms. Beware of humidity.
§
Only use low power for this devices as described in this manual and
only use certified transformers.
only use certified transformers.
§
Connect transformers and soldering irons only in approved mains
sockets installed by an authorised electrician.
sockets installed by an authorised electrician.
§
Observe cable diameter requirements.
§
After condensation build up, allow a minimum of 2 hours for dispersion.
§
Use only original spare parts if you have to repair the devices.