Allen & Heath DJ Mixer Allen & Heath XONE:23C XONE:23C 数据表
产品代码
XONE:23C
10
REAR PANEL CONNECTIONS
Phono inputs
For connection to turntables only; this input has RIAA equalization for
moving magnet cartridges.
moving magnet cartridges.
Note: An internal modification can convert these to Line (see page 18)
Effects SND output
Connect this output
to the input of an ex-
ternal effects unit.
to the input of an ex-
ternal effects unit.
Line input
For connection to
a line level device;
(CD players etc)
a line level device;
(CD players etc)
Line input
For connection to
a line level device;
(CD players etc)
a line level device;
(CD players etc)
Effects RTN input
Connect this input to
the output of an
the output of an
external effects unit.
PSU connection
To prevent damage to your
Xone:23 only use an A&H
approved power supply
Xone:23 only use an A&H
approved power supply
P o w e r
Switch
Switch
S w i t c h e s
the unit On/
Off
the unit On/
Off
Main outputs
Connect these to a PA
amplifier using professional
balanced XLR connectors
for maximum hum and
noise rejection.
balanced XLR connectors
for maximum hum and
noise rejection.
Do not short either pins
2 or 3 to ground. For
unbalanced operation
use pin 2 only and leave
pin 3 floating.
2 or 3 to ground. For
unbalanced operation
use pin 2 only and leave
pin 3 floating.
Failure to observe this
could result in damage
to your Xone:23C
could result in damage
to your Xone:23C
Monitor output
Connect to a powered
speaker or Hi-FI system
speaker or Hi-FI system
Record output
Use to record your mix.
Connect to a Minidisk
recorder or computer
soundcard input etc
Connect to a Minidisk
recorder or computer
soundcard input etc
Grounding post
Connect the ground
wire from turntables
(if fitted) to minimise
hum
wire from turntables
(if fitted) to minimise
hum
MADE IN CHINA
USB and X:LINK
Connect USB to a computer to
stream audio files or to record
the output of the mixer into
software.
stream audio files or to record
the output of the mixer into
software.
Connect the X:LINK socket
to any compatible Allen &
Heath controller to enable
MIDI data to be passed to the
computer.
to any compatible Allen &
Heath controller to enable
MIDI data to be passed to the
computer.