Renkforce LV-BH 400 Fog Machine LV-BH 400 数据表
产品代码
LV-BH 400
26
10. Electric Connection
The mains socket to which the device is connected must be easily accessible so that it can be
quickly separated from the mains voltage in case of an error.
Do not let the mains cable come into contact with other cables.
Be careful when handling mains cables and mains connections. Mains voltage may cause po-
tentially fatal electric shock.
tentially fatal electric shock.
Make sure that no cables lie around openly. Install cables professionally to prevent accidents.
Convince yourself that the device is switched off before you connect it to the power supply.
Ensure before plugging in the mains plug that the device voltage indicated on the rating plate
corresponds to the available mains voltage. Do not connect the device if the indication does
not correspond to the available mains voltage. Incorrect supply voltage may lead to irreparable
damage to the device and danger to the user.
corresponds to the available mains voltage. Do not connect the device if the indication does
not correspond to the available mains voltage. Incorrect supply voltage may lead to irreparable
damage to the device and danger to the user.
• Install the connection cable for the wire-bound remote control up to the site from which you are going to
control the device.
• The rear of the remote control is magnetic. The remote control thus sticks to metal objects.
• Plug the plug of the wire-bound remote control into TIMER socket (1) at the back of the device.
• Plug the enclosed receiver for the radio remote control into the REMOTE (4) socket at the rear of the
• Plug the plug of the wire-bound remote control into TIMER socket (1) at the back of the device.
• Plug the enclosed receiver for the radio remote control into the REMOTE (4) socket at the rear of the
device. The receiver also has a magnetic rear so that it will adhere to the housing of the device.
• Connect the low-voltage plug of the enclosed mains line to the mains connection (3) at the device‘s
back.
• Plug the mains plug into a mains socket with a protective ground contact for operation of the device.
However, do not plug in the mains plug. Before connecting the device to the power supply, you first have
to fill the tanks with fog liquid or soap bubble fluid (see „Operation“).