Steinberg WAVELAB 8.5 RETAIL SOFTWARE 45370 数据表

Here, select the writing speed. The highest speed depends both on the 
capabilities of your writing device and of the media present in the device.

If this option is activated, clicking OK initiates a simulation of writing the CD. 
If this test is passed, the real write operation will succeed. If the test fails, try 
again at a lower writing speed.

If this option is activated, the disc is ejected after the write process.

Lets you specify the source path of the DDP image.

You can write audio montages to an audio CD or a DDP image.

P

REREQUISITE

 

Set up your audio montage, and make your CD writing settings in the Global 
preferences.

N

OTE

On the Mac, insert a media in the drive after opening WaveLab. Otherwise, the drive 
is under the control of the operating system and is not available for WaveLab.

P

ROCEDURE

1.

Optional: Check the audio montage to make sure that all starts, ends, and 
transitions are as intended.

2.

Optional: In the CD window, select Functions > Check CD conformity, to 
check that all settings conform to the Red Book standard.

3.

Insert an empty CD into your drive.

4.

In the CD window, select Functions > Write Audio CD or DDP.

5.

From the Device pop-up menu, select the writing device that you want to use.

6.

If you want to bypass the Master Section, activate Bypass Master Section.

7.

Select the writing speed from the Speed pop-up menu.

8.

Select the number of copies that you want to write.

When you want to write more than one copy, it is recommended to activate Render 
to temporary file before writing.