Steinberg WAVELAB 8.5 RETAIL SOFTWARE 45370 数据表

3.

Select the channels to be used for device output (to gear) and device input 
(from gear), and click OK.

These should be different I/O channels than the ones you use for playback and 
recording. The available outputs in this plug-in equals the number of inputs (up to 8).

4.

In the Effects pane of the Master Section window, select the External Gear 
plug-in from the ASIO submenu.

The External Gear plug-in window opens.

5.

Make your settings.

A

FTER

 C

OMPLETING

 T

HIS

 T

ASK

 

Now you can process a signal through the external processor, just as if it was a 
software plug-in effect. If you render a file using the External Gear plug-in, playback 
is not available during the rendering.

This is a special Master Section plug-in that allows you to render a signal coming in 
to the inputs of a sound card together with any Master Section effects. This signal 
can be anything your sound card accepts, such as a feed from a mixer, a recorder, 
or a microphone.

By default, this plug-in is located in the ASIO submenu of the Master Section 
effects. An ASIO driver must be used, and only one instance of this plug-in is 
allowed in the Master Section plug-in chain.

When the Audio Input plug-in is loaded, wave playback is not possible.

P

ROCEDURE

1.

In any workspace, select Options > VST Audio Connections, and set the 
Audio Device to ASIO.

2.

Open the ASIO plug-ins tab.

3.

Select the channels to be used for device input, optionally name them, and 
click OK.

4.

In the top effect slot of the Effects pane of the Master Section window, select 
the Audio Input plug-in from the ASIO submenu.

5.

In the Audio input plug-in window, set the number of inputs and the sample 
rate.

You have to match the number of inputs in the VST Audio Connections dialog to the 
number of inputs selected here.

6.

Start playback.

The cursor does not move, but the Play button is lit and you can now monitor the input 
source. Pressing Stop ends input monitoring.