Samsung BN59-01012A 用户手册

15

14

  

● Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

● If the main unit is powered off, the wireless subwoofer will be in standby mode and the STANDBY LED on 

the upper side will come on after the Link indicator (Blue LED) blinks for 30 seconds.

● If you use a device that uses the same frequency (2.4GHz) as the Soundbar near the Soundbar, 

interference may cause some sound interruption.

● The transmission distance of the wireless signal between the main unit and subwoofer is about 10 m, but 

may vary depending on your operating environment.  

If a steel-concrete or metallic wall is between the main unit and the wireless subwoofer, the system may not 

operate at all, because the wireless signal cannot penetrate metal.

● If the main unit doesn't make a wireless connection, follow steps 1-5 to re-set the connection between the 

main unit and wireless subwoofer.

  

● The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from water and 

moisture.

● For optimal listening performance, make sure that the area around the wireless subwoofer location is clear 

of any obstructions.

HW-J450-EN ENG-1226.idml   14

2015/1/16   11:55:57