Sygonix Surveillance Camera 24457D 24457D 用户手册
产品代码
24457D
31
j) Setting Function “PRIVACY”
You can cover up to 8 image areas with a rectangle (8 different colours can be selected), so that
they are invisible.
This is done to protect sensitive areas from monitoring or recording, e.g. the workplace of an em-
ployee or the display on the screen.
“AREA SEL”
You can cover up to 8 image areas with a rectangle (8 different colours can be selected), so that
they are invisible.
This is done to protect sensitive areas from monitoring or recording, e.g. the workplace of an em-
ployee or the display on the screen.
“AREA SEL”
Select one of the 8 image areas (1/8......0.8/8).
The sliders “TOP”, “BOTTOM”, “LEFT” and “RIGHT” can be used to draw a
rectangle.
rectangle.
“COLOR”
Set the colour of the rectangle; 8 different colours are available. Observe that
the colours are displayed grey in black/white display of the camera image
(e.g. at night)!
the colours are displayed grey in black/white display of the camera image
(e.g. at night)!
“TRANSP”
Set the rectangle transparency here. The rectangle is not transparent for a
setting of “1.00”.
setting of “1.00”.
“MOSAIC”
If “TRANSP” is set to a value below “1.00”, the image may also be displayed
falsifi ed if you select “ON”.
falsifi ed if you select “ON”.
The image area selected for “AREA SEL” is applied with a mosaic pattern. This
still shows when things use in the image area, but no details are visible.
still shows when things use in the image area, but no details are visible.
k) Setting Function “DAY/NIGHT”
The camera switches automatically between colour and black/white depending on ambience
brightness.
“AUTO”
The camera switches automatically between colour and black/white depending on ambience
brightness.
“AUTO”
The camera switches automatically between colour and black/white depend-
ing on ambience brightness in the basic setting.
ing on ambience brightness in the basic setting.
Press the button to show a submenu:
“BURST”: The setting “ON” activates the colour carrier signal in black/white
display. This means that, e.g., the menu items are displayed in colour the
setup menu even in black/white display.
display. This means that, e.g., the menu items are displayed in colour the
setup menu even in black/white display.
The image quality may improve by using black/white on colour screens.
“DELAY CNT”: Delay value for switching
“DAY->NIGHT”: Brightness value from which onwards the switch from colour
to black/white mode is performed
to black/white mode is performed
“NIGHT->DAY”: Brightness value from which onwards the switch from black/
white to colour mode is performed
white to colour mode is performed