3D Systems CubeX CUBEX 数据表
产品代码
CUBEX
53
MAINTAINING YOUR Cube
26
Cleaning the Exterior
•
Clean the Cube’s exterior with a lint free cloth and water.
Dampen the cloth with water and wipe the outer surfaces of
any debris that is visible.
Cleaning the Print Pad
•
Submerge print pad in a container filled with warm city (tap)
water. Please do not use well water; it contains certain min-
erals that may make your creation difficult to remove from
the print pad.
•
Rinse pad under tap water and dry using a lint free wipe.
Cleaning the Print Tip
WARNING –
PRINTJET NOZZLE TIP
BECOMES EXTREMELY HOT DUR-
ING SET-UP AND OPERATION. DO
NOT TOUCH NOZZLE.
•
Using the small pliers, pull away any plastic debris away from the nozzle tip.
•
If the debris is stubborn, the nozzle may need to be heated to make the debris soft
enough to remove.