Siemens MICROMASTER 420 1.1 kW 1-phase frequency inverter, 230 Vac to , 6SE6420-2AB21-1BA1 6SE6420-2AB21-1BA1 数据表
![Siemens](https://files.manualsbrain.com/attachments/fea10bc852adcb1f4f76708d5daebca542e532b9/common/fit/150/50/c53f5738b57089fc3d6c279e23db7450685a19c9616727fc1f659077967b/brand_logo.png)
产品代码
6SE6420-2AB21-1BA1
International English 8. SUPPLEMENTARY INFORMATION
104
MICROMASTER 420 Operating Instructions
6SE6400-5AA00-0BP0
Notes
• The MICROMASTER inverters are intended exclusively for professional
applications. Therefore, they do not fall within the scope of the harmonics
emissions specification EN 61000-3-2.
emissions specification EN 61000-3-2.
• Maximum mains supply voltage when filters are fitted is 460V.
8.1 Available
options
The following accessories are available as options for your MICROMASTER MM420
Inverter. For more details please refer to the Reference Manual or contact your local
Siemens sales office if you require assistance.
Inverter. For more details please refer to the Reference Manual or contact your local
Siemens sales office if you require assistance.
• Additional RFI suppression filter
• Clear Text Display for all languages (AOP)
• PROFIBUS module (PRO)
• DriveMonitor software for control via PC
• Output chokes and line chokes
• IP20 (NEMA 1) Accessory Kit (Only for Frame Size A)
8.2
Electro-Magnetic Compatibility (EMC)
All manufacturers / assemblers of electrical apparatus which “performs a complete
intrinsic function and is placed on the market as a single unit intended for the end user”
must comply with the EMC directive EEC/89/336.
There are three routes for the manufacturer/assembler to demonstrate compliance:
intrinsic function and is placed on the market as a single unit intended for the end user”
must comply with the EMC directive EEC/89/336.
There are three routes for the manufacturer/assembler to demonstrate compliance:
Self-Certification
This is a manufacturer's declaration that the European standards applicable to the
electrical environment for which the apparatus is intended have been met. Only
standards that have been officially published in the Official Journal of the European
Community can be cited in the manufacturer's declaration.
electrical environment for which the apparatus is intended have been met. Only
standards that have been officially published in the Official Journal of the European
Community can be cited in the manufacturer's declaration.
Technical Construction File
A technical construction file can be prepared for the apparatus describing its EMC
characteristics. This file must be approved by a ‘Competent Body’ appointed by the
appropriate European government organization. This approach allows the use of
standards that are still in preparation.
characteristics. This file must be approved by a ‘Competent Body’ appointed by the
appropriate European government organization. This approach allows the use of
standards that are still in preparation.
EC Type Examination Certificate
This approach is only applicable to radio communication transmitting apparatus. All
MICROMASTER units are certified for compliance with the EMC directive, when installed
in accordance with the recommendations in Section 2.
MICROMASTER units are certified for compliance with the EMC directive, when installed
in accordance with the recommendations in Section 2.