Siemens SPS starter kit 6ED1057-3BA10-0AA8 6ED1057-3BA10-0AA8 数据表
产品代码
6ED1057-3BA10-0AA8
Tutorial
3.4 Getting started with project creation
LOGO!Soft Comfort Online Help
156
Operating Instructions, 06/2014
3.4.2.4
Configuring settings for other standard devices
For other standard devices
If you have added SIMATIC HMI devices, SIMATIC S7 devices, a LOGO! TDE, or other
devices in the network view, you can then edit the device name, IP address, subnet mask,
and gateway for those devices. You can also browse files on your computer and import a
project file with the settings for HMI and S7 devices.
3.4.2.5
Detecting device online status
After you configure the online and offline settings, you can go online and view online status
for the devices.
Push the devices online to start scanning for any connected LOGO! Base Modules.
LOGO!Soft Comfort detects all the devices in the project as accessible, inaccessible and
Push the devices online to start scanning for any connected LOGO! Base Modules.
LOGO!Soft Comfort detects all the devices in the project as accessible, inaccessible and
unknown devices, see "Going online (0BA8 only) (Page 44)" for more information.
See "Configuring settings for unknown devices (Page 156)" for more information about
See "Configuring settings for unknown devices (Page 156)" for more information about
configuring unknown devices.
After the your device is found, you can stop displaying the online status for all devices. See
After the your device is found, you can stop displaying the online status for all devices. See
"Going offline (0BA8 only) (Page 45)" for more information.
3.4.2.6
Configuring settings for unknown devices
You can configure the device name, IP address, subnet mask, and gateway of an unknown
device to define it on the network.
Note
On normal occasions, you are able to delete the connection line between local PC and its
On normal occasions, you are able to delete the connection line between local PC and its
connected device in the network view by choosing it and clicking the button on the
standard tool bar. But when deleting the unknown devices and their connection lines, you will
need to disconnect them physically with the local PC, instead of deleting from the network
view.
Uploading the added devices
To upload the added device to a project, right-click the device in the network view and select
Upload from the shortcut menu. If no previous settings, the uploaded device can use the IP
address, subnet mask, and gateway you defined in the step above. After completion, the
device is displayed as an identified LOGO! Base Module.
Note
If the IP address of the uploaded device conflicts with the existing device, a warning
If the IP address of the uploaded device conflicts with the existing device, a warning
message of IP address conflict pops out and then you need to reset its IP address according
to "Configuring LOGO! online settings (Page 155)"