Siemens SPS starter kit 6ED1057-3BA10-0AA8 6ED1057-3BA10-0AA8 数据表
产品代码
6ED1057-3BA10-0AA8
Reference material
5.1 Constants and connectors
LOGO!Soft Comfort Online Help
Operating Instructions, 06/2014
Operating Instructions, 06/2014
203
Available device types and their block types are as follows:
Device type
Block type
(Page 161)
VB0 to VB850
(Page 161)
I1 to I24, Q1 to Q20, M1 to M64 and VB0 to VB 850
IB0 to IB65535, QB0 to QB65535, MB0 to MB65535, VB0 to VB65535,
DB0 to DB16000 and .DBB0 to .DBB65535
(Page 163)
Q1 to Q20
(Page 163)
Q1 to Q16
● LOGO! 0BA7
For LOGO! 0BA7, network outputs can only write values to LOGO! 0BA7 Slave. If you
write a value to a slave Base Module, you must enter the slave IP address or select the
existing LOGO! 0BA7 Slave. The block number is from Q1 to Q16.
Network outputs are inactive in the UDF Editor.
5.1.1.14
Network analog outputs (0BA7 and 0BA8 only)
When the LOGO! 0BA7 or LOGO! 0BA8 Base Module is in slave mode, you can configure a
network analog output on the master to control an analog output on the slave. You can
configure up to 16 network analog outputs.
● LOGO! 0BA8
● LOGO! 0BA8
For LOGO! 0BA8, network analog outputs can write values to the following types:
– VM
– VM
When writing values to VM, the VW address range is 0 to 849.
– Remote device