Siemens SPS starter kit 6ED1057-3BA10-0AA8 6ED1057-3BA10-0AA8 数据表
产品代码
6ED1057-3BA10-0AA8
User interface
2.8 Menu bar
LOGO!Soft Comfort Online Help
78
Operating Instructions, 06/2014
2.8.5.7
Tools -> Transfer -> Show FW version
LOGO!Soft Comfort requires that you confirm the connection interface for each
communication attempt. See "Tools -> Transfer (Page 70)" for complete information.
This command allows you to identify the firmware version of the LOGO! Base module.
This command allows you to identify the firmware version of the LOGO! Base module.
2.8.5.8
Tools -> Transfer -> Clear User Program and Password
LOGO!Soft Comfort requires that you confirm the connection interface for each
communication attempt. See "Tools -> Transfer (Page 70)" for complete information.
This command allows you to clear the circuit program in the connected LOGO! device and
This command allows you to clear the circuit program in the connected LOGO! device and
the program password if a password exists.
You must respond to a confirmation dialog to ensure that you do intend to clear both the
You must respond to a confirmation dialog to ensure that you do intend to clear both the
circuit program and the password (if configured) from the LOGO! device. After you confirm
the command, LOGO!Soft Comfort performs the clear operation. If you do not confirm the
command, LOGO!Soft Comfort performs no action. The circuit program and password (if
configured) remain in the LOGO! device.
Note
LOGO! devices prior to version 0BA6 do not support this function. If you attempt this
LOGO! devices prior to version 0BA6 do not support this function. If you attempt this
command on an earlier device, LOGO!Soft Comfort displays a message that states that the
device does not support this function.
2.8.5.9
Tools -> Transfer -> Upload Data Log (0BA7 and 0BA8 only)
LOGO!Soft Comfort requires that you confirm the connection interface for each
communication attempt. See "Tools -> Transfer (Page 70)" for complete information.
This menu allows you to upload a data log from the EEPROM to the PC when the Base
This menu allows you to upload a data log from the EEPROM to the PC when the Base
Module is in RUN mode.
You can upload your data log and browse to a desired directory and save your data log
You can upload your data log and browse to a desired directory and save your data log
document.
LOGO!Soft Comfort uploads the file from the EEPROM and saves it as a .CSV file that you
LOGO!Soft Comfort uploads the file from the EEPROM and saves it as a .CSV file that you
can open from Microsoft Excel or a text editor.