Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 数据表
产品代码
6ED1057-3BA00-0AA8
Programming LOGO!
3.7 Writing and starting the circuit program
LOGO!
Manual, 06/2014, A5E33039675
Manual, 06/2014, A5E33039675
85
3. Press and to position the cursor.
4. Press and to modify the value at the relevant position.
5. Confirm your entries with OK.
4. Press and to modify the value at the relevant position.
5. Confirm your entries with OK.
Setting the time
Set the time T = 12:00 minutes:
1. Move the cursor to the first digit: Press or
2. Select the digit "1": Press or
3. Shift the cursor to the second digit: Press or
4. Select digit "2": Press or
5. Move the cursor to the unit: Press or
6. Select the timebase "m" (for minutes): Press or
7. Confirm your entries with OK.
1. Move the cursor to the first digit: Press or
2. Select the digit "1": Press or
3. Shift the cursor to the second digit: Press or
4. Select digit "2": Press or
5. Move the cursor to the unit: Press or
6. Select the timebase "m" (for minutes): Press or
7. Confirm your entries with OK.
Showing/hiding parameters - the parameter protection mode
If you want to show/hide the parameter and allow/prevent its modification in parameter
assignment mode, follow these steps:
1. Move the cursor to "-/": Press or
2. Switch to editing mode: Press OK
3. Select the protection mode: Press or
1. Move the cursor to "-/": Press or
2. Switch to editing mode: Press OK
3. Select the protection mode: Press or
The display should now show:
4. Confirm your entries with OK.
Enabling/disabling retentivity
To decide whether you want to retain your current data after a power failure or not, follow
these steps:
1. Move the cursor to "-/": Press or
2. Switch to editing mode: Press OK
3. Move the cursor to the retentivity setting: Press or
1. Move the cursor to "-/": Press or
2. Switch to editing mode: Press OK
3. Move the cursor to the retentivity setting: Press or