Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 数据表
产品代码
6ED1057-3BA00-0AA8
Programming LOGO!
3.7 Writing and starting the circuit program
LOGO!
90
Manual, 06/2014, A5E33039675
5. Move the cursor to "
②
": Press or
6. Select "
②
": Press OK
LOGO! shows the following display:
The circle with a dot before "
④
" above indicates the current setting for the analog output
channels.
You can select either "
You can select either "
③
" or "
④
". The default setting is "
④
" which means that LOGO!
holds the values of the analog outputs at their last values. A setting of "
③
" means that
LOGO! sets the analog output values to specific values, which you can configure. When
LOGO! changes from RUN mode to STOP mode, the values of the analog outputs
change as well, depending on the setting.
7. Select the desired output setting: Press or .
8. Confirm your entry: Press OK.
8. Confirm your entry: Press OK.
Defining a specific analog output value
To output a specific analog value at the analog outputs, follow these steps:
1. Move the cursor to "
1. Move the cursor to "
①
": Press or
2. Confirm "
①
": Press OK
The display shows:
3. Select a desired analog output and press OK.