Siemens SPS starter kit 6ED1057-3BA10-0AA8 6ED1057-3BA10-0AA8 数据表
产品代码
6ED1057-3BA10-0AA8
Security
10.3 Menu access security
LOGO!
282
Manual, 06/2014, A5E33039675
3. Move the cursor to "
②
": Press or
4. Confirm "
②
" with OK.
LOGO! shows the following display:
By default, the card is unprotected.
5. Move the cursor to "
③
": Press or
6. Confirm your selection by pressing OK.
program to the card in a separate action at power-on.
You can always change the status of protection function disabled to protection function
You can always change the status of protection function disabled to protection function
enabled.
A status change from protection function enabled to protection function disabled is only
A status change from protection function enabled to protection function disabled is only
possible if the card does not contain a circuit program.
10.3
Menu access security
LOGO! provides two access levels, administrator and operator, to limit access to specific
menus in programming mode.You can change LOGO!'s access level from administrator to
operator or from operator to administrator. For more information about switching between the
access levels, refer to Section "Configuring menu access protection for LOGO! (Page 63)".