Rutenbeck 17010553 数据表
30
HDMI-Connection
There are currently five stan-
dards. Using numbers to desi-
gnate the version (HDMI 1.0
/ 1.1, etc.) is prohibited since
November 2011! Devices are
not permitted to display versi-
on numbers any more either
since January 1, 2012. The
manufacturers are required
to use descriptive logos. Two
types of cable are currently
in use:
· Category 1
74.25 MHz (corresponding
to the HDMI Standard), can
be used for Type A - Type
A, C, or D as well as Type
C - Type C connector
combinations.
· Category 2
340 MHz (corresponding
to HDMI High Speed), can
be used for Type A - Type
A, C, or D as well as for
Type C - Type C connector
combinations.
All cables used should bear
the „Approved HDMI®-
Associate“ logo as a seal of
approval. It is more important
for the installer to determine
the type of application than the
designation (Category 1 or 2)
so that the correct cable can
then be selected. The HDMI
connector KM HDMI supports
the HDMI standard and the
HDMI High Speed standard
with Type A connectors –
assuming the correct cable is
used and has been properly
installed.