Kingston Technology 4GB 800MHz DDR2 Non-ECC CL6 SODIMM KVR800D2S6/4G 数据表
产品代码
KVR800D2S6/4G
Memory Module Specification
DESCRIPTION:
This document describes ValueRAM's 512M x 64-bit 4GB (4096MB) CL6 DDR2-800 SDRAM
(Synchronous DRAM) memory module. The components on this module include sixteen stacked
256M x 8-bit DDR2-800 SDRAM. This 200-pin SODIMM uses gold contact fingers and requires
+1.8V. The electrical and mechanical specifications are as follows:
(Synchronous DRAM) memory module. The components on this module include sixteen stacked
256M x 8-bit DDR2-800 SDRAM. This 200-pin SODIMM uses gold contact fingers and requires
+1.8V. The electrical and mechanical specifications are as follows:
FEATURES:
Clock Cycle Time (tCK) CL= 6
2.5ns
Row Cycle Time (t
RC
)
60ns (min.)
Refresh to Active/Refresh Command Time (tRFC)
195ns
Row Active Time (tRAS)
45ns (min.) / 70,000ns (max.)
Single Power Supply of
+1.8V (+/- .1V)
Power
1.440 W (operating)
UL Rating
94 V - 0
Document No. VALUERAM0699-001.A00
08/27/07
Figure 1: KVR800D2S6/4G 200-Pin SODIMM
KVR800D2S6/4G
4GB 512M x 64-Bit DDR2-800
CL6 200-Pin SODIMM
(units = millimeters)
Note: The module defined in this data sheet is one of several configurations available under this part number.
While all configurations are compatible, the DRAM combination and/or the module height may vary from what
is described here.
While all configurations are compatible, the DRAM combination and/or the module height may vary from what
is described here.