Bourns Multifuse cutoffs 24 V (L x W x H) 3.1 x 1.55 x 0.6 mm SF-1206S500-2 1 pc(s) SF-1206S500-2 数据表

■

  Single blow fuse for overcurrent 

 protection

■

  3216 (EIA 1206) miniature footprint

■

  Slow blow fuse

■

 UL listed

■

  RoHS compliant* and halogen free**

■

  Thin fi lm chip fuse

■

  Surface mount packaging for automated 

 assembly

***Resistance value was measured with less than 10 % of rated current.

Represents total content. Layout may 
vary.

SinglFuse™ 
Product Designator

SMD Footprint
     3216 (EIA 1206) size

Fuse Blow Type
 

F = Fast acting

 

S = Slow blow

Rated Current
 

050-700 (500 mA - 7.00 A)

Packaging Type
 

- 2 = Tape & Reel (5,000 pcs./reel)

Carrying Capacity ..................................... No fusing ....................................................Rated current, 4 hours
Fusing Time .............................................. Within 5 seconds ........................................250 % of its rated current 
Interrupting Ability ..................................... No mechanical damages ...........................After the fuse is interrupted, rated voltage applied for 
 

 

30 seconds again

Bending Test ............................................. No mechanical damages ...........................Distance between holding points: 90 mm,
 

 

Bending: 3 mm,1time, 30 seconds

Resistance to Solder Heat ........................ ±20 % .........................................................260 °C ±5 °C,10 seconds ±1 second
Solderability .............................................. 95 % coverage minimum ...........................235 °C ±5 °C, 2 ±0.5 second
 

 

245 °C ±5 °C, 2 ±0.5 second (lead free)

Temperature Rise ..................................... <75 ° ..........................................................100 % of its rated current, measure of surface 
   temperature 
Resistance to Dry Heat............................. ±20 % .........................................................105 °C ±5 °C,1000 hours
Resistance to Solvent ............................... No evident damage on protective ..............23 °C ±5 °C of isopropyl alcohol, 90 seconds coating
   and 

marking

Residual Resistance ................................. 10k W or more ...........................................Measure DC resistance after fusing
Thermal Shock ......................................... DR < 10 % .................................................-20 °C / +25 °C /+125 °C /+25 °C, 10 cycles

RATING CURRENT (A)
F = 0.50
K = 0.80
L = 1.00
M = 1.25
P = 1.50
S = 2.00

T = 2.50
3 = 3.00
W = 4.00
Y = 5.00
Z = 7.00

SF-1206S050

0.50

Open within 5 sec. 

at 250 % rated 

current

385

DC 63 V 

DC 63 V 

50 A

0.030

SF-1206S080

0.80

165

0.068

SF-1206S100

1.00

108

0.098

SF-1206S125

1.25

76

0.155

SF-1206S150

1.50

51

0.236

SF-1206S200

2.00

32

0.339

SF-1206S250

2.50

26

DC 32 V 

DC 32 V 

50 A

0.605

SF-1206S300

3.00

20

0.933

SF-1206S400

4.00

14

DC 24 V 

DC 24 V

50 A 

1.537

SF-1206S500

5.00

10

2.533

SF-1206S700

7.00

6.5

5.684

*  RoHS Directive 2002/95/EC Jan 27 2003 including Annex. 
** Bourns is using the defi nition that appears to be the prevalent defi nition used as the industry standard at this time. The Bourns defi nition of “halogen-free” is:
 

Bromine (Br) content: 

≤ 900 ppm; Chlorine (Cl) content: ≤ 900 ppm; Total Br + Cl content: ≤1500 ppm.

“SinglFuse” is a trademark of Bourns, Inc.
Specifi cations are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specifi c applications.

Asia-Pacifi c: 
Tel: +886-2 2562-4117
Fax: +886-2 2562-4116

Europe: 
Tel: +41-41 768 5555
Fax: +41-41 768 5510

The Americas: 
Tel: +1-951 781-5500
Fax: +1-951 781-5700