Bitron Home 902010/21 Wireless magnetic contact 902010/21 数据表
产品代码
902010/21
3
DS902010-001
Abb. / Fig. 4
Abb. / Fig. 5
Abb. / Fig. 6
Thank you for having chosen a quality product of Bitron Home, an Urmet Group brand. Bitron Home
products have been specifically designed for use with the QIVICON platform for which they are approved.
QIVICON enables you to manage and control you smart phone in a really easy way: applications for PC,
tablet and smartphone let you manage all connected devise, at any time and from anywhere.
MOUNTING
You can install the magnetic contact and the magnet either by screws or using adhesive strips. In order to
ensure a reliable and safe operation we suggest a fixed mounting of the magnetic contact. Screws, dowels
and double-sided adhesive tape are included in the packaging of the product. If required you may use the
spacers included to adjust the magnet’s position.
Please make sure that the distance between the magnet and the ribbed side-surface of the magnetic
contact does not exceed 25 mm in closed state.
ensure a reliable and safe operation we suggest a fixed mounting of the magnetic contact. Screws, dowels
and double-sided adhesive tape are included in the packaging of the product. If required you may use the
spacers included to adjust the magnet’s position.
Please make sure that the distance between the magnet and the ribbed side-surface of the magnetic
contact does not exceed 25 mm in closed state.
SET-UP AND OPERATION
In order to set-up this device you need to have a QIVICON home base which is equipped with a QIVICON
ZigBee® radio stick. The home based needs to be set up and you need a valid user account. For further
information, please refer to http://www.qivicon.de/support.
ZigBee® radio stick. The home based needs to be set up and you need a valid user account. For further
information, please refer to http://www.qivicon.de/support.
1. Remove plastic cover which protects the battery during transport on the back of the device (Fig. 1).
2. Log on at Mein QIVICON (www.qivicon.de/login). Go to Gerät hinzufügen and select the
manufacturer Bitron Home. Then choose your device (Fig. 2).
3. Follow the connection wizard’s instructions.
If you wish to associate the device to a different home base, e.g. in case you need to replace the home
base, repeat steps 2 and 3.
You can use the magnetic contact in order to connect external alarm contacts. Such contacts could be
wired door and window contacts or any other sensor which signals its status through normally closed
contact. In order to connect the external contact, open the magnetic contact by removing the screw (Fig.
6/H) and connect the cable to the terminal connector (Fig. 5/D). If jumper JP3 (Fig. 5/E) is closed, only the
status of the external contact will be transmitted. If JP3 is open, also the status of the internal contact will
be considered (Fig. 4).
In order to replace the battery, open the magnetic contact (Fig. 6/H) and replace the battery (Fig. 5/F) by a
model of identic type (Lithium CR2 3V). It is not necessary to register the contact again.
If you wish to associate the device to a different home base, e.g. in case you need to replace the home
base, repeat steps 2 and 3.
You can use the magnetic contact in order to connect external alarm contacts. Such contacts could be
wired door and window contacts or any other sensor which signals its status through normally closed
contact. In order to connect the external contact, open the magnetic contact by removing the screw (Fig.
6/H) and connect the cable to the terminal connector (Fig. 5/D). If jumper JP3 (Fig. 5/E) is closed, only the
status of the external contact will be transmitted. If JP3 is open, also the status of the internal contact will
be considered (Fig. 4).
In order to replace the battery, open the magnetic contact (Fig. 6/H) and replace the battery (Fig. 5/F) by a
model of identic type (Lithium CR2 3V). It is not necessary to register the contact again.