Saitek Pro Flight Yoke System PZ44 数据表

9. At the Registration screen, select 

Check this box to register now and follow the

on-screen instructions, or you can choose to select this option later . 

10.Click on 

Finish to complete the installation. 

B) Drivers and Programming Software For Advanced Users 
Follow points 1 - 7 of the install procedure in A), then at the Software Setup screen,

select 

Install the SST Programming Software and click Next. 

In the following Software Setup screen, click Next and follow the on-screen

instructions. At this point you will be asked to inst all such features as the Saitek Magic

Mouse, HID-compliant mouse, Saitek Magic Keyboard and HID Keyboard Device

(these are what XP calls the Programming elements of your Saitek controller).

Continue to click on 

Next and Finish to accept the installation until the Registration

screen appears. 
At the Registration screen, select 

Check this box to register now and follow the on-

screen instructions, or do not select this option and register later . 
Upon completion of the installation, you have the option to Run Profile Editor , which

will give you a view of the programming environment. If you do not wish to see the

Profile Editor at this point, just uncheck the box and click on 

Finish to complete the

installation. 

From time to time there may be updates to the driver and programming sof tware for

this product. You can check for the latest software updates by visiting the Saitek

website (www.saitek.com) and clicking on Downloads. A drop down menu will appear.

Select Drivers and Software. 

5

4

the quadrant, ensure that as you look at the unit the rocker switches are at the

bottom.
Now tighten the throttle unit clamp's screw mechanism until it is firmly

attached to your table. You can also position the throttle quadrant on

the left or right side of the flight yoke.
Now, connect the Throttle Quadrant to back of the flight yoke with the PS/2-style

connector provided.
Use the integrated USB Hub on the side of the Pro Flight  Yoke to easily connect other

parts of the Saitek Pro Flight range of product s, such as additional Pro Flight Throttle

Quadrants, Pro Flight Rudder Pedals or other peripherals.

A) Drivers Only For Typical Users 
1. With your computer switched on, close down any programs that are currently

running and insert the Installation CD into your CD-ROM drive. 

2. When the Introduction Screen appears, click 

Install Software to continue. If the CD

does not run automatically, select 

Start from the Windows® Taskbar, then Run and

type D:\Setup.exe and click 

OK - where D:\ is letter of your CD-ROM drive. 

3. When the Welcome screen appears, click 

Next to continue. 

4. After reading the Disclaimer, select the 

option and click 

Next to continue. 

5. At the Driver Setup screen, if you haven't already done so, plug the USB cable into

one of your computer's USB ports and click on 

Next. 

6. At the Driver Setup screen, click 

Next to test your controller. 

7. When the Saitek Controller screen appears, try out all your controller's buttons and

controls to show that it is working properly. When you have finished, click 

OK. 

8. At the Software Setup screen, select 

Software and click Next. The Programming Software can be installed at a later

date by following instruction (B). below 

PZ45_Pro Flight yoke_QSG2.qxd  05/09/2007  09:55  Page 4