TP-LINK M7350 用户手册
M7350
LTE-Advanced Mobile WiFi User Guide
-32-
Figure 4-22 DHCP Server
DHCP Server: You can select to enable or disable the DHCP server. If you disable the
server, you must have another DHCP server within your network or else you must
configure the IP address of the computer manually.
server, you must have another DHCP server within your network or else you must
configure the IP address of the computer manually.
IP Address: The IP address of the device, which is used to log in to its web-based
management page. The default value is 192.168.0.1.
management page. The default value is 192.168.0.1.
Subnet Mask: An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
255.255.255.0 as the subnet mask.
Start IP Address: This field specifies the first address in the IP address pool.
192.168.0.100 is the default start IP address.
192.168.0.100 is the default start IP address.
End IP Address: This field specifies the last address in the IP address pool.
192.168.0.199 is the default end IP address.
192.168.0.199 is the default end IP address.
Lease Time: The lease time is the length of time a network user will be allowed to keep
connecting to the device with the current assigned address. Enter the amount of time, in
minutes, and the current assigned address will be "leased". The time range is 2 to 2880
minutes. The default value is 120 minutes.
connecting to the device with the current assigned address. Enter the amount of time, in
minutes, and the current assigned address will be "leased". The time range is 2 to 2880
minutes. The default value is 120 minutes.
Primary DNS Server: Input the DNS IP address provided by your ISP.
Secondary DNS Server: Input the IP address of another DNS server if your ISP provides
two DNS servers. It's optional.
two DNS servers. It's optional.
Click
Save to save your settings.
Note:
To use the DHCP server function of the device, you should configure all clients in the LAN as
"Obtain an IP Address automatically" mode. This function will take effect until the device reboots
Wi-Fi.