ZyXEL VMG1312-B10A VMG1312-B10A-EU01V1F 数据表

 Chapter 7 Wireless

VMG1312-B10A User’s Guide

Note: The Device applies the security settings of the SSID1 profile (see 

). If you want to use the WPS feature, make sure you have set the 

security mode of SSID1 to WPA-PSK, WPA2-PSK or No Security.

Click Network Setting > Wireless > WPS. The following screen displays. Select Enable and click 
Apply to activate the WPS function. Then you can configure the WPS settings in this screen. 

Network Setting > Wireless > WPS

The following table describes the labels in this screen.

Network Setting > Wireless > WPS

WPS

Select Enable to activate WPS on the Device.

Method 1

Use this section to set up a WPS wireless network using Push Button Configuration (PBC).

Connect

Click this button to add another WPS-enabled wireless device (within wireless range of the 
Device) to your wireless network. This button may either be a physical button on the 
outside of device, or a menu button similar to the Connect button on this screen.

Note: You must press the other wireless device’s WPS button within two minutes of pressing 

this button.

Method 2

Use this section to set up a WPS wireless network by entering the PIN of the client into the 
Device.

Register

Enter the PIN of the device that you are setting up a WPS connection with and click 
Register to authenticate and add the wireless device to your wireless network.

You can find the PIN either on the outside of the device, or by checking the device’s 
settings.

Note: You must also activate WPS on that device within two minutes to have it present its PIN 

to the Device.

Method 3

Use this section to set up a WPS wireless network by entering the PIN of the Device into the 
client.