ZyXEL VMG1312-B10A VMG1312-B10A-EU01V1F 数据表
产品代码
VMG1312-B10A-EU01V1F
Chapter 4 Tutorials
VMG1312-B10A User’s Guide
38
3
Select the Active check box. Enter the General and ATM PVC Configuration settings as provided
above.
above.
Set the Type to ADSL over ATM.
Choose the Encapsulation specified by your DSL service provider. For this example, the service
provider requires a username and password to establish Internet connection. Therefore, select
PPPoE as the WAN encapsulation type.
provider requires a username and password to establish Internet connection. Therefore, select
PPPoE as the WAN encapsulation type.
Set the IPv6/IPv4 Mode to IPv4 Only.
4
Enter the account information provided to you by your DSL service provider.
5
Configure this rule as your default Internet connection by selecting the Apply as Default Gateway
check box. Then select DNS as Static and enter the DNS server addresses provided to you, such as
192.168.5.2
check box. Then select DNS as Static and enter the DNS server addresses provided to you, such as
192.168.5.2
(DNS server1)/192.168.5.1 (DNS server2).
6
Leave the rest of the fields to the default settings.
Connection Mode
Routing
Encapsulation
PPPoE
IPv6/IPv4 Mode
IPv4
ATM PVC Configuration
VPI/VCI
36/48
Encapsulation Mode
LLC/SNAP-Bridging
Service Category
UBR without PCR
Account Information
PPP User Name
1234@DSL-Ex.com
PPP Password
ABCDEF!
PPPoE Service Name
MyDSL
Static IP Address
192.168.1.32
Others
PPPoE Passthrough: Disabled
NAT: Enabled
IGMP Multicast Proxy: Enabled
Apply as Default Gateway: Enabled