TP-LINK 16-Port Gigabit Web Smart Switch with 2 Combo SFP Slots TL-SG2216WEB 数据表

产品代码

TL-SG2216WEB



Link-local Address Config

Config Mode:

Select the link-local address configuration mode.



Manual: When this option is selected, you should assign a

link-local address manually.



Auto: When this option is selected, the switch will generate a

link-local address automatically.

Link-local Address:

Enter a link-local address.

Status:

Displays the status of the link-local address.



Normal: Indicates that the link-local address is normal.



Try: Indicates that the link-local address may be newly

configured.



Repeat: Indicates that the link-local address is duplicate. It is

illegal to access the switch using the IPv6 address(including

link-local and global address).



Global Address Autoconfig via RA Message

Enable global

address auto

configuration via RA

message:

When this option is enabled, the switch automatically configures a
global address and other information according to the address

prefix and other configuration parameters from the received
RA(Router Advertisement) message.



Global Address Autoconfig via DHCPv6 Server

Enable Global

Address Autoconfig

via DHCPv6 Server:

When this option is enabled, the system will try to obtain the

global address from the DHCPv6 Server.



Add a global address manually

Address Format:

You can select the global address format according to your
requirements.



EUI-64: Indicates that you only need to specify an address

prefix, and then the system will create a global address

automatically.



Not EUI-64: Indicates that you have to specify an intact global

address.

Global Address:

When selecting the mode of EUI-64, please input the address
prefix here, otherwise, please input an intact IPv6 address here.



Global address Table

Select:

Select the desired entry to delete or modify the corresponding

global address.

Global Address:

Modify the global address.

Prefix Length:

Modify the prefix length of the global address.