Brother FAX-8360P 数据表

When you set the Receive Mode to manual (the Fax and F/T lights are both off), you must answer 
each incoming call yourself with an external telephone. Select this mode by pressing Mode key. 
Here is what you should do when using Manual Mode:

The Ring Delay setting determines the number of times the machine rings before it answers in FAX 
ONLY or FAX/TEL mode. (See Operation from an External or Extension Telephone, page 43. Also 
see For Fax/Tel Mode Only, page 43.)

Press Menu, 2, 1, 1.

Press 

 or 

 to select how many times the line rings before the machine answers (01-04).

Press Set when the screen displays your selection.

Press Stop/Exit.

You need to determine how long the machine will notify you with its special F/T pseudo-ring when 
you have a voice call. This ringing happens after the initial ringing from the phone company. Only 
the machine rings, for 20, 30, 40 or 70 seconds; no other phones on the same line ring the special 
F/T pseudo-ring. However, you can answer the call on any extension phone (in a separate wall 
socket) on the same line as the machine. (See Operation from an External or Extension Telephone, 
page 43.)

Press Menu, 2, 1, 2.

Press 

 or 

 to select how long the machine will ring to alert you that you have a voice call, 

and then press Set.

Press Stop/Exit.

Now, when a call comes in and the machine is set to Fax/Tel (F/T) Mode, all phones on this line will 
ring the number of times you selected in Ring Delay.

You can let the machine pick up and detect if it’s a fax or voice call. If it’s a fax call, the machine 
prints the fax. If it’s a voice call, the machine signals you with an F/T pseudo-ring for the length of 
time you selected in F/T Ring Time. Lift the external telephone’s handset, and then press Tel to 
answer.

1.

Regular phone call

Talk as you normally would.

2.

Phone call and request to 
send a fax

Press Fax Start when finished talking, and replace the 
external telephone’s handset.
NOTE: Sender must also press Start.

3.

Fax tone...

Wait until the fax machine takes over the call or press 
Fax Start.

Even if the caller hangs up during the F/T pseudo-ringing, the machine continues 
the F/T pseudo-ringing for the set time.