Auerswald COMfortel 2600 90117 用户手册
产品代码
90117
Preparation
COMfortel 1600/2600 - Firmware Version 1.0 - Commissioning Instructions 01 08/12
43
8.
Insert the wider connector (RJ-11) of the connection cable into the jack la-
belled with
belled with
on the lower side of the next key extension module.
9.
Repeat steps 5. and 6. for the connected key extension modules.
10.
Remove the bridge plug from the jack marked with
on the lower side
of the telephone.
11.
Insert the RJ-45 connector of the power supply into the jack labelled with
on the lower side of the telephone.
Do not connect to the 230 V mains supply before the telephone is actually
commissioned.
commissioned.
Warning: Using the wrong power supply plug can result in a life-threatening
electric shock or can damage or destroy or the device.
electric shock or can damage or destroy or the device.
씮
For this reason, only use a power plug of type no. FW7577/EU/40.
Connecting the Receiver
Steps to Take
1.
Insert the RJ-10 connector at the longer, plane end of the spiral cord into
the jack labelled with
the jack labelled with
on the lower side of the telephone.
Fig. 8: Assembling and connecting the COMfortel Xtension300 key
extension modules
extension modules