Samsung BN59-01012A 数据表

4 

•

Disconnect the power cord

Never remove the control board cover while the power is turned on.

To avoid the possibility of an electrical shock, always disconnect the power 
cord when installing or removing ANY internal or external accessories.

•

Discharge static electricity

The control board and internal accessories (network interface card or 
memory module) are sensitive to static electricity. Before installing or 
removing any internal accessories, discharge static electricity from your 
body by touching something metal, such as the metal back plate on any 
device plugged into a grounded power source. If you walk around before 
finishing the installation, repeat this procedure to discharge any static 
electricity again.

 

When installing accessories, the battery inside the machine is a service 
component. Do not change it by yourself. There is a risk of an explosion if 
battery is replaced by an incorrect type. Dispose used batteries according to 
the instructions.

 

5 

When you install the optional devices such as optional tray, memory, etc, this 

machine automatically detects and sets the optional devices. If you cannot use 

the optional devices you installed in this driver, you need to set the optional 

devices in Device Options.

Click the Windows Start menu.

For Windows XP/2003, select Printers and Faxes.

•

For Windows 2008/Vista, select Control Panel > Hardware and 
Sound > Printers.

•

For Windows 7, select Control Panel > Hardware and Sound > 
Devices and Printers.

•

For Windows Server 2008 R2, select Control Panel > Hardware > 
Devices and Printers.

Right-click your machine. 

For Windows XP/2003/2008/Vista, press Properties.

For Windows 7 and Windows Server 2008 R2, from context menus, select 
the Printer properties.