Datalogic PowerScan PD9500 PD9530-HPK1 数据表

Mounting the BC9xx0 Cradle

Product Reference Guide

                           13

The BC9xx0 can be connected to a Host by means of a multi-interface cable, 

which must be simply plugged into the Host connector, visible on the front 

panel of the cradle.
To disconnect the cable, insert a paper clip or other similar object into the 

hole corresponding to the Host connector on the body of the cradle. Push 

down on the clip while unplugging the cable. Refer to the following figures:

*The power supply is optional, the cradle can be powered by the USB port. In 

this case the full charging of an empty battery will take about 10 hours. For 

intense usage and/or when the system is shut down during the night, the 

use of an external power supply is recommended.