Datalogic PowerScan PD9500 PD9530-HPK1 数据表
产品代码
PD9530-HPK1
Enter/Exit Programming Mode
226
PowerScan™ PD9530/PBT9500/PM9500
Bluetooth Security Mode
This feature enables/disables authentication and encryption of the Blue-
tooth link. Use the feature
on page 226 to specify the
length and digits in the PIN code used to authenticate the Bluetooth Link.
DEFAULT
$CBTSE00(CR)
Bluetooth Security Mode = Disable
$CBTSE01(CR)
Bluetooth Security Mode = Enable
Changing the security mode setting will unlink the devices. If the Automatic
Configuration Update is set to the default “Enabled” setting, the devices must
only be relinked. If the Automatic Configuration Update is set to “Disabled,”
the Security Mode setting must also be updated in the Base Station using
Aladdin. After the Base Station has been updated, the devices must be
relinked.
Configuration Update is set to the default “Enabled” setting, the devices must
only be relinked. If the Automatic Configuration Update is set to “Disabled,”
the Security Mode setting must also be updated in the Base Station using
Aladdin. After the Base Station has been updated, the devices must be
relinked.
Bluetooth PIN Code
After enabling Security Mode (see
specify whether you want to set a 4-digit or a 16-digit PIN Code.
See
$CBTPS00\r
Select 4-character Bluetooth PIN Code
DEFAULT
~$CBTPS01\r
Select 16-character Bluetooth PIN Code
Select PIN Code Length