Datalogic PowerScan PD9500 PD9530-HPK1 数据表

Product Reference Guide

                           309

A message from the Host to the base must follow these rules:

• If Address stamping options or address delimiter are enabled on the 

base, the Host replay must have address field and delimiter too. Other-

wise the message will be ignored. Address delimiter is present only 

when address stamping is enabled.

• Address stamping is necessary to correctly route the message to the 

PM9500, especially when more than one handheld is linked to the same 

base. Address stamping could be disabled if the system is in point to 

point configuration. If address stamping is not enabled, the messages 

are addressed to the first handheld linked to the base. 

• The maximum character length for messages is 48.

• Messages end with “CR” 0x0D ASCII character. The CR character cannot 

be contained in the middle.

• Messages cannot start with '$' or # because these are reserved for Ser-

vice mode command

• Base station can receive host message only if Host Commands Obey/

Ignore is set to Ignore.

• Message could be sent to the handheld in response to a Label when 

“Transmit mode” require Ack from Host (see transmit mode parameter) 

or at any time. When messages are sent not in response to a label must 

start with DC2 0x12 ASCII character and could be sent in any transmit 

mode setting.

• Message could be sent to all handhelds linked to the base by using a 

Multicast message:  

• In order to receive a message, handhelds must not be in sleep state.

The format of the ACK from Host message (used for transmission mode 02) 

is:

The format of a generic message From Host to HH is:

where DC2 is ASCII 0x12 (^R) character.
[Items in square brackets are optional.]

• If you want to control the Scanner's beeper from the host, you will also 

probably want to disable the good transmission beep that is emitted 

when the code is received from the cradle. (See "

).

The message field can store plain text and escape sequences.

• Escape sequences are interpreted as commands.