EVGA 04G-P4-2975-KR 用户手册

5

PCI Express (PCI-E) and PCI slots are different, so prior to installation; please verify that the graphics card bus type 
and available slot are the same.

If your graphics card is equipped with a supplemental power adapter, it is required that it be connected at the time 
of installation. This supplemental power adapter ensures that your graphics card receives the necessary power 
that will allow it to function at optimal performance levels. Your card may require one or two 6 or 8-pin PCI Express 
(PCI-E) supplemental power connectors. Please note that the 8-pin PCI-E power connector is not the same as the 
8-pin CPU power connector. Please see the below illustration.

5.  Align your new card with the appropriate slot, (see illustration below) and press it in firmly until the card is fully 
     seated. Make sure that the metal contacts of the card are completely pushed into the expansion slot.
6.  Connect the supplemental PCI Express (PCI-E) power adapter(s) to the card if applicable. (See illustration  
     below.)
7.  Replace the retaining screw to fasten the card into place, and then replace the computer cover.
8.  Reconnect any devices that you detached during installation, and then connect the monitor’s video cable to
     your new graphics card.
9.  Apply power to your system, boot to the operating system and install the proper drivers.

PCI Graphics Cards 

PCI Express (PCI-E) Graphics Cards 

English