Samsung BN59-01012A 数据表
13
- English
Connections
Connecting to a TV and External Devices
HDMI OUT
HDMI IN
1
2
LAN
AUX IN
FM ANT
OPTICAL
DIGITAL
AUDIO IN
L
R
OPTICAL OUT
AUDIO OUT
HDMI OUT
HDMI IN (ARC)
HDMI OUT
HDMI IN
1
2
LAN
POWER
AUX IN
FM ANT
OPTICAL
DIGITAL
AUDIO IN
L
R
SPEAKERS OUT
CENTER
SUBWOOFER
FRONT
L
FRONT
R
FRONT TOP
L
FRONT TOP
R
IMPEDANCE :
3
Ω
Method 1
Method 3
Method 2
R
Red
W
White
External
devices
Connecting to a Tv
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI
IN jack on your TV. If the TV supports ARC, you can hear the audio from your TV through the home cinema
with only this cable connected. See page 19 in this manual and the section on ARC in your TV's user's
manual for details.
IN jack on your TV. If the TV supports ARC, you can hear the audio from your TV through the home cinema
with only this cable connected. See page 19 in this manual and the section on ARC in your TV's user's
manual for details.
Connecting to External devices
Method 1 HdMI IN : Connecting to an External Component with an HdMI Cable
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI
OUT jack on your digital device. Select the HdMI1 or HdMI2 mode.
OUT jack on your digital device. Select the HdMI1 or HdMI2 mode.
Method 2 AUx IN : Connecting an External Analogue Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out
jack on the external analogue component. Select the AUx mode.
jack on the external analogue component. Select the AUx mode.
●
Be sure to match the colours on the cable plugs to the colours on the input and output jacks.
Method 3 OpTICAL : Connecting an External digital Audio Component
Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes) to the home cinema. Using a digital optical cable (not supplied), connect the
Optical Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device
using a digital optical cable. Select the d. IN mode.
Receivers (Set-Top-Boxes) to the home cinema. Using a digital optical cable (not supplied), connect the
Optical Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device
using a digital optical cable. Select the d. IN mode.
✎
To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
✎
This system supports Digital sampling frequencies of 32 kHz or higher from external digital
components.
components.
✎
This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
Selecting an External device to Use
To select an external device after you have connected it, press the
SOURCE
button. Each time you press
the button, the mode changes in this order : Bd/dvd ; d. IN ; AUx ; HdMI1 ; HdMI2 ; FM ; BT