Samsung BN59-01012A 数据表

 - English

Lets you adjust the output of the product to 
the screen size of your TV. (See page 51)

Bd Wise is Samsung’s latest inter-connectivity 

feature. When you connect a Samsung product 
and a Samsung TV with Bd Wise to each 

other via HDMI, and Bd Wise is on in both the 

product and TV, the product outputs video at 
the video resolution and frame rate of the Blu-
ray/DVD Disc.

Lets you set the output resolution of the HDMI 
video signal to Bd Wise, Auto, 1080p, 1080i, 
720p, 576p/480p. The number indicates the 

number of lines of video per frame. The i and 
p indicate interlaced and progressive scan, 
respectively.  
The more lines, the higher quality.

Setting the Movie Frame (24 fps) feature to 
Auto lets the product adjust its HDMI output 

to 24 frames per second automatically for 
improved picture quality if attached to a 24 fps 
compatible TV.

You can enjoy the Movie Frame (24 fps) 

feature only on a TV supporting this frame 
rate.

Movie Frame is only available when the 
product is in the HDMI 1080p output 
resolution modes.

Converts DVD playback to 24 frames per 
second and outputs it via HDMI. This option is 
only available when Movie Frame (24 fps) is set 

to Auto.

 

✎

This feature applies to NTSC discs only.

Lets you select the optimal size for the Smart 
Hub or Screen Mirroring Screen.

Lets you set the colour space format for the 
HDMI output to match the capabilities of the 
connected device (TV, monitor, etc).

Lets you set the product to output video 
from the HDMI OUT jack with Deep Colour. 
Deep Colour provides more accurate colour 
reproduction with greater colour depth.

Lets you improve picture quality when viewing 
DVDs.

Lets you configure the settings of the speakers 
you have connected to obtain the best possible 
surround sound.



Normal Mode : Select if you have set up your 

speakers in the recommended speaker layout 
with the surround speakers next to or behind 
the listening positions.



Simple Mode : Select if you have put your 

surround speakers in front of the listening 
position. Downmixes the front sound to the 
surround sound speakers.

 

✎

SFE, Virtual 7.1 will not operate when the 
Simple Mode is on.



Sound Output : Lets you select which speakers 

are active, either the TV's speakers or the home 
cinema's speakers.



Settings (Home theatre speakers) : Lets you 

adjust the following speaker settings and turn 
the test tone on and off so you can test the 
speakers.

 

- volume Level : Lets you adjust the relative 

loudness of each speaker from 6dB to 
-6dB. For example, if you like deep bass, 
you can increase the loudness of the 
subwoofer by 6dB.

 

- distance : Lets you adjust the relative 

distance of each speaker from the listening 
position up to 9 meters. The farther the 
distance, the louder the speaker will be.

 

- Speaker Test : Begins a test to set the best 

surround sound configuration. Press Stop 
Test to stop the test while it is in progress.