Samsung BN59-01012A 数据表
163
Appendix >
Maintaining the camera
Cautions about using the battery
Protect batteries, chargers, and memory cards from damage.
Prevent batteries from making contact with metal objects, as this can
create a connection between the + and – terminals of your battery and
lead to temporary or permanent battery damage and may cause a fire or
electric shock.
create a connection between the + and – terminals of your battery and
lead to temporary or permanent battery damage and may cause a fire or
electric shock.
Notes about charging the battery
•
If the status lamp is off, ensure that the battery is inserted correctly.
•
If the camera is on while charging, the battery may not fully charge. Turn
off the camera before charging the battery.
off the camera before charging the battery.
•
Do not use your camera when you are charging the battery. This may
cause a fire or electric shock.
cause a fire or electric shock.
•
Do not pull the power supply cord to disconnect the plug from the
power outlet, as this may cause a fire or electric shock.
power outlet, as this may cause a fire or electric shock.
•
Let the battery charge for at least 10 minutes before turning on the
camera.
camera.
•
If you connect the camera to an external power source when the battery
is depleted, using high energy-consuming functions will cause the
camera to turn off. To use the camera normally, recharge the battery.
is depleted, using high energy-consuming functions will cause the
camera to turn off. To use the camera normally, recharge the battery.
•
If you reconnect the power cable when the battery is fully charged, the
status lamp turns on for approximately 30 minutes.
status lamp turns on for approximately 30 minutes.
•
Using the flash or recording videos depletes the battery quickly. Charge
the battery fully before using the camera.
the battery fully before using the camera.
•
If the status lamp blinks in red, reconnect the cable, or remove the
battery and insert it again.
battery and insert it again.
•
If you charge the battery when the cable is overheated or the
temperature is too high, the status lamp may blink in red. Charging will
start when the battery cools down.
temperature is too high, the status lamp may blink in red. Charging will
start when the battery cools down.
•
Overcharging batteries may shorten battery life. After charging is
finished, disconnect the cable from your camera.
finished, disconnect the cable from your camera.
•
Do not bend or place heavy objects on the AC cable. Doing so may
damage the cable.
damage the cable.