Atdec SPACEDEC Display Donut 50mm SD-DO-50-B 产品宣传页
产品代码
SD-DO-50-B
Donut 42
Donut Combo
Donut 50
Technical Specifications
SPACEDEC
DONUT 42 & 50 & DONUT COMBO
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 01.02.08
Maximum Load: 11.5 kgs (25lbs)
IMPORTANT: Each of the Donut Bolts must be
tightened evenly. Failure to do so will damage
the Donut Clamp. Do not over-tighten as this
may also result in damage.
9
8
8
124mm (4
7
/
8
”)
124mm (4
7
/
8
”)
* This product is VESA compliant and suits both 75mm (3”) and
100mm (4”) LCD display mounting hole patterns.
NOTE: Add 25mm (1”) for Quick Release
169mm (6
5
/
8
”)
42mm (1
5
/
8
”)
+/- 40º
Rotation
+/- 40º
Rotation
+/- 40º
Rotation
+/- 40º
Rotation
90
m
m
(3
9
/
16
”)
90
m
m
(3
9
/
16
”)
51mm (2”)
169mm (6
5
/
8
”)
100mm (4”)
75mm (3”)
100mm
(4”)
75mm
(3”)
Note: Extension Clips
are included to suit VESA
100mm x 100mm (4” x 4”)
Mounting Hole Patterns.