MEAN WELL LED driver HLG-240A-12A HLG-240A-12A 数据表

I/P-O/P:3.75KVAC

I/P-FG:1.88KVAC

O/P-FG:0.5KVAC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25

/ 70% RH

HLG-240-12 A

A : IP65 rated. Output voltage and constant current level can be adjusted through internal potential meter.

B : IP67 rated. Constant current level adjustable through output cable.

C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal

potential meter.

12V

6 ~12V

15V

7.5 ~ 15V

20V

10 ~ 20V

24V

12 ~ 24V

30V

15 ~ 30V

36V

18 ~ 36V

48V

24 ~ 48V

16A

15A

12A

10A

8A

6.7A

5A

192W

225W

240W

240W

240W

241.2W

240W

150mVp-p

150mVp-p

14 ~ 16V

150mVp-p

18.6 ~ 21.4V

150mVp-p

22.4 ~ 25.6V

200mVp-p

28 ~ 32V

250mVp-p

33.5 ~ 38.5V

250mVp-p

44.8 ~ 51.2V

2.5%

8 ~ 16A

2.0%

7.5 ~ 15A

1.0%

6 ~ 12A

1.0%

5 ~ 10A

1.0%

4 ~ 8A

1.0%

3.3 ~ 6.7A

1.0%

2.5 ~ 5A

11.2 ~ 12.8V

Can be adjusted by internal potential meter or through output cable

0.5%

0.5%

0.5%

0.5%

0.5%

0.5%

0.5%

2.0%

1.5%

1.0%

0.5%

0.5%

0.5%

0.5%

2500ms, 80ms at full load

230VAC /115VAC

15ms at full load

230VAC /115VAC

90 ~ 264VAC

127 ~ 373VDC

47 ~ 63Hz

PF

0.95/230VAC

PF

0.98/115VAC at full load and rated output voltage

PF

0.9 at 65 ~ 100% load

90%

90%

92%

93%

93%

93.5%

94%

15.5 ~ 18V

16.5 ~ 19.5V 22 ~ 26V

95

5

(TSW1)

26 ~ 33V

32.5 ~ 36.5V 40 ~ 48V

53 ~ 62V

4A / 115VAC

2A / 230VAC

COLD START 75A/230VAC

<0.75mA / 240VAC

95 ~ 108%

Protection type : Constant current limiting, recovers automatically after fault condition is removed

Compliance to EN55015, EN55022 (CISPR22) Class B

Compliance to EN61000-3-2 Class C (

50% load) ; EN61000-3-3

Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61547, EN55024, heavy industry level (surge 4KV), criteria A

-40 ~ +60

@ full load ; +70

@ 60% load (Refer to derating curve)

20 ~ 95% RH non-condensing

-40 ~ +80

, 10 ~ 95% RH

0.03%/

(0 ~ 50

)

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

207.9Khrs min.

MIL-HDBK-217F (25

)

244.2*68*38.8mm (L*W*H)(HLG-240-Blank/A/B)

251*68*38.8mm (L*W*H)(HLG-240-C)

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25

of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Constant current operation region is within 50% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please

reconfirm special electrical requirements for some specific system design.

5. Derating may be needed under low input voltages. Please check the static characteristics for more details.
6. Type A and type C only.
7. Safety and EMC design refer to EN60598-1, subject 8750(UL), CNS15233, GB7000.1, FCC part18.
8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the

complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

10. Refer to warranty statement.

1.3Kg; 12pcs/16.6Kg/0.74CUFT(HLG-240-Blank/A/B)

1.23Kg; 12pcs/15.8Kg/1.16CUFT(HLG-240-C)

Protection type : Shut down and latch off o/p voltage, re-power on to recover

240W Single Output Switching Power Supply

Universal AC input / Full range

Built-in active PFC function

Protections: Short circuit / Overload / Over voltage / Over temperature

Cooling by free air convection

OCP point adjustable through output cable or internal potential meter

Suitable for LED lighting and moving sign applications

IP67 / IP65 design for indoor or outdoor installations

Compliance to worldwide safety regulations for lighting

5 years warranty

Suitable for dry / damp / wet locations

(Note.10)

Features :

105

5

(TSW1)

Protection type : Shut down o/p voltage, recovers automatically after temperature goes down

Hiccup mode, recovers automatically after fault condition is removed.

Blank : IP67 rated. Cable for I/O connection.

54V

27 ~ 54V

4.45A

240.3W

350mVp-p

50 ~ 57V

1.0%

2.23 ~ 4.45A

0.5%

0.5%

42V

21 ~ 42V

5.72A

240.2W

250mVp-p

39 ~ 45V

1.0%

2.86 ~ 5.72A

0.5%

0.5%

94%

94%

46 ~ 50V

59 ~ 65V

UL1012, TUV EN61347-1, EN61347-2-13 independent (except for HLG-240H C type), UL60950-1, UL8750, TUV EN60950-1, IP65 or IP67 approved