Carson RC console 2.4 GHz No. of channels: 6 501001 数据表

Control of models is impossible with insufficient or 
no voltage in the transmitter or receiver. A receiver 
battery, that is too weak will move the servo(s) very 
slowly, and that may cause erratic operation of your 
model. When using a car that operates both the 

electric motor and receiver on the same  battery, 
such as a BEC system, you should discontinue  
operating the car, when the top speed becomes 
sharply reduced, otherwise loss of control will result 
soon afterwards.

By reaching a high speed

 

R/C models can be 

dangerous and could cause personal injury or 
damage to property. The appeal of driving an RC 
model depends on assembling the model 
accurately and operating it with due care and 
attention.

1.   Follow all the warnings, and  instructions in this 

manual.

2.   Be „Safety Conscious“ and use your common 

sense at all times.

3.   Remember that operating any R/C model 

demands skills developed through proper 
instruction and training – they are not acquired 
immediately.

4.   Don’t run risks, such as operating your model in 

adverse weather or when there is a malfunction 
of which you are aware.

5.   The remote control’s special technology makes 

the 2.4 GHz transmitter and receiver a single 
unit and coordinates them together. Therefore,  
the receiver is not influenced by any other 
transmitter or radio signal. 

 

It is no longer necessary  to check whether 
other models nearby are running on the same 
frequency channel, as was the case with 
previous frequencies (27/35/40 MHz).

6.   Respect the rules of the R/C track on which you 

 operate your model.

7.   Running your model in the street is very 

dangerous to both automobile drivers and your 
model. Avoid running your model in the street.

8.   Never aim or direct your model car at any 

person or animal. These model cars accelerate 
very quickly and can cause serious physical 
injury.

9.   This remote control unit is not recommended 

for operating model ships.

10. At any time during the operation of your model, 

should you sense, feel, or observe any erratic 
operation or abnormality, end your operation. 

 

Do not operate it again until you are certain that 
the problems have been fixed.

 

RC models are not “toys” – safety precautions 
and forward thinking are essential when 
operating a remote controlled model!

11.  Take advantage of the failsafe setting. During 

a breakdown in signal transmission (such was 
when transmission voltage is too weak), this 
setting shifts the model into a control mode that 
prevents it from taking off uncontrolled.