Reely Hendheld RC 2.4 GHz No. of channels: 6 1310037 用户手册

After you have inserted four new batteries, check the position of the toggle switches. All switches must be in the front 

position. 
The control stick for the elevator/nod and aileron/roll function (see figure 1, item 7) must be in the middle position. The

control stick for the rudder/tail and throttle/pitch functions (see figure 1, item 17) must be in the middle position as well

or must be pushed into the bottom-most position (motor off). 
Now switch on the transmitter using the on/off switch (see fig. 1, item 11).
First, you will hear three signal sounds in increasing pitch and the operating display with the currently set model 

appears in the backlit display. 
The backlighting is deactivated automatically about 20 seconds after activation or the last button operation. If no ope-

rating element ids operated within 60 s with the plant on, the plant will emit short signal sounds as warning note.
The operating display consists of the following elements:
1  Manufacturer logo
2  Digital encoding
3  Memory display
4  Model name display
5  Throttle/pitch trimming display (in Mode II)*
6  Rudder/tail trimming display (in Mode II)*
7  Aileron/roll trimming display (in Mode II)*
8  Elevator/nod trimming display (in Mode II)*
9  Battery symbol for transmitter voltage supply 
10  Battery symbol for receiver voltage supply 
11  Model type figure
12  Display of the receiver voltage
13  Display of the transmitter voltage
14  Display of the defectively transmitted transmitter data

*  Further information for mode setting can be found in the system setting menu in the menu item „Sticks mode“.

 The operating instructions in figure 4 appear completely only if the receiver system is in operation. Otherwi-

se, e.g. the values for receiver voltage or signal quality are not displayed.