Reely Hendheld RC 2.4 GHz No. of channels: 6 1310037 用户手册

On its right hand side, the receiver (see figure 8, item 1) offers the option of connecting up to 6 servos with JR or

Futaba plug connectors. 
The receiver battery or a battery box is connected to a switch cable either on a free slot or at the top-most slot  

(B/VCC). 

  When connecting servos and speed controllers, always make sure of correct polarity of the plug connectors. 

The impulse line of the servos (depending on manufacturer yellow, white or orange) must be connected to 

the left (inner) one of the three adjacent plug-in contacts. The plug contact for the negative line (black or 

brown, depending on the manufacturer) must be connected to the right (outer) pin contact.

The receiver outputs are assigned as follows:

1

CH1

Roll servo

Aileron servo

2

CH2

Pitch servo

Elevator servo

3

CH3

Throttle servo or flight controller

Throttle servo or flight controller

4

CH4

Tail servo/gyro

Rudder servo

5

CH5

Gyro sensitivity

Additional channel 5

6

CH6

Pitch servo

Additional channel 6

-

B/VCC

Battery connection*

Battery connection*